switch
High-Speed, 2-of-4 Crosspoint Switch Handles USB 2.0 Data Rates
Submitted by Ionela on Fri, 10/31/2008 - 17:50.
 |
Maxim Integrated Products introduces the MAX4989, a bidirectional, 2-of-4, USB 2.0 crosspoint switch. This device switches any 2 of 4 USB pairs while supporting data rates up to 480Mbps, thus enabling multiple USB host devices to be switched simultaneously. To enable this performance, the MAX4989 features 5.0%u03A9 (typ) on-resistance and low, 6.0pF (typ) on-capacitance switching architecture. |
Freescale’s third-generation eXtreme Switch sets performance standards for automotive lighting
Submitted by Ionela on Thu, 10/09/2008 - 18:39.
 |
Freescale Semiconductor has introduced the third generation of its award-winning eXtreme Switch portfolio with four high-side power switches the first devices in the portfolio tailored for automotive lighting applications. The switches unique features, including the ability to drive high-intensity discharge (HID) xenon, halogen and light-emitting diode (LED) light sources with a single device, are engineered to allow automakers to improve lighting efficiency, extend bulb life and reduce bill of material costs. |
ANALOG DEVICES’ 32 × 32 VIDEO CROSSPOINT SWITCHES PROVIDE AN UNMATCHED COMBINATION OF LOW-POWER AND HIGH BANDWIDTH
Submitted by Ionela on Fri, 09/26/2008 - 09:43.
 |
Analog Devices, Inc. introduced the industry’s lowest power 32 × 32 analog crosspoint switches. Delivering an unmatched combination of low power and high speed, the ADV320x family of buffered analog crosspoint switches consumes only 1.25 W – 40 percent less than the nearest 32 × 32 solution – while delivering superior bandwidth of 300 MHz, a 300 percent increase in speed over alternative low-power crosspoint switches. |
High-Speed PCIe Passive Switches Handle Next-Generation Data Rates
Submitted by Ionela on Wed, 09/17/2008 - 20:42.
 |
Maxim Integrated Products introduces the MAX4889B/MAX4889C ultra-high-speed, 1:2 or 2:1 PCI Express (PCIe) passive switches. These quad double-pole/double-throw (DPDT) switches are ideal for switching four half lanes of PCIe data between two destinations. To maximize performance, four devices can be used to convert 16 PCIe lanes into two sets of 8 lanes for use with either SLI or CrossFire graphics cards. |
Fairchild Semiconductor's IntelliMAX Load Switches Provide the Industry's Highest Accuracy Current Limiting
Submitted by Ionela on Tue, 08/12/2008 - 17:48.
 |
Fairchild Semiconductor offers designers a series of advanced load switches with superior current limiting accuracy for robust circuit protection. This tight tolerance series of advanced load switches provides an optimal design balance between ensuring sufficient system protection and delivering high performance. This protection is particularly important in USB applications where the number of accessories and peripherals have exponentially increased; presenting designers with the challenge of ensuring that their circuit designs have robust protection. |
8-channel, high-voltage switches provide a fast interface for next-generation ultrasound switching
Submitted by Ionela on Fri, 08/01/2008 - 07:20.
 |
Maxim Integrated Products introduces the MAX4800A/MAX4802A 8-channel, high-voltage, low-charge-injection SPST switches controlled by a fast, 20MHz serial interface. Designed using Maxim's proprietary, BCDMOS process technology, these devices combine high-voltage, bilateral DMOS switches and low-power CMOS logic, thus enabling efficient control of high-voltage analog signals with low-voltage control signals. Additionally, these devices support a wide range of high-voltage supplies, including: VPS /VPS- = 100V/-100V, 185V/-15V, and 40V/-160V. The MAX4802A also integrates 35k%u03A9 bleed resistors to discharge capacitive loads such as piezoelectric transducers, thus saving cost and space by eliminating the need for external bleed resistors. |
Triple DPDT, low on-capacitance data switches are ideal for multiplexing SDHC and SDIO interfaces
Submitted by Ionela on Tue, 05/20/2008 - 07:05.
 |
Maxim Integrated Products introduces the MAX4996/MAX4996L triple double-pole/double-throw (DPDT) switches for multiplexing high-frequency signals up to 670MHz. To enable high-frequency switching, these switches feature low on-resistance (2.0%u03A9, typ), low on-capacitance (6pF, typ), and low power consumption (3 microamps, typ). |
Hi-Speed USB (USB 2.0) DPDT switches provide ±15kV ESD protection in tiny UTQFN package
Submitted by Ionela on Mon, 05/19/2008 - 07:45.
 |
Maxim Integrated Products introduces the MAX4983E/MAX4984E double-pole/double-throw (DPDT) analog switches for multiplexing Hi-Speed USB (USB 2.0) signals at 480Mbps. To enable the use of a single connector in high-performance switching applications, these switches feature low on-resistance (5Ω typ) and high 950MHz bandwidth. |
Vishay Releases New Analog Multiplexers and Switches
Submitted by Ionela on Mon, 05/12/2008 - 07:42.
 |
Eight New Devices Provide Low Leakage Currents From 0.25 nA to 5 nA and Extended Temperature Range From - 40 °C to + 125 °C MALVERN, PENNSYLVANIA — May 12, 2008 — Vishay Intertechnology, Inc. (NYSE: VSH) today released eight new high-frequency, low-charge-injection analog multiplexers and switches for precision instrumentation applications. They are also the first devices of their kind to be offered in the leadless 1.8-mm by 2.6-mm miniQFN package, in addition to the standard TSSOP and SOIC packages. |
Fujitsu Features New 26-Port 10-Gigabit Ethernet Switch IC in Interop
Submitted by Ionela on Mon, 05/05/2008 - 07:14.
 |
Streaming Video Using PCs and 10GbE Evaluation Board, plus Demonstrations from Teak Technologies and CorEdge Networks, will Highlight Exhibit at Booth 2101 Interop Las Vegas, NV, April 28, 2008 Fujitsu Microelectronics America, Inc. (FMA) will feature its new 26-port 10Gbps Ethernet (10GbE) switch IC at the annual Interop Las Vegas conference, April 28 to May 2. |
